| AP Specification |
| Standards Compliance |
IEEE 802.11b |
| Frequency band |
2512 to 2584 MHz |
| Transmission power |
200mW, 1W |
| Receiver sensitivity* |
11 Mbps: 8% PER, -82 dBm (typical) |
| * Minimum receiver input power level at which a packet error ratio (PER) of less than the indicatedpercentage can be maintained, given a packet length of 1024 bytes and conditions of 20° to 30° C. |
| Antenna type |
External high gain antenna |
| Input Power |
Outdoor 200mW Input voltage DC 12V 2A; external power supplyincluded (input voltage 100V to 240V AC)
Outdoor 1W Input voltage DC 15V 3A; external power supply included (input voltage 100V to 240V AC) |
| Data rates |
1, 2, 5.5, and 11 Mbps with auto fallback |
| RF spreading scheme |
Direct-sequence spread-spectrum (DSSS) |
| Encoding and modulation |
BPSK, QPSK, and CCK |
| Security |
64-bit / 128-bit Wired Equivalent Privacy (WEP) encryption; MACAccess Control; Administrative Access Control |
| Software Support |
Kick Start
Web-based Tool
Bridge Auto Learning |
| Network Management System |
Windows 95/98/ME/NT4.0/2000/XP |
| Environmental requirements |
Operating temperature: -30° to +70° C |
