HOME > Product Category > Wireless Access Point > 2.4GHz Wireless System(Indoor) of Wireless Access Point > Indoor AP/Router/USB&PCI adapter/Modem > AWAP-001

AWAP-001
In Wall Box Access Point

Introduction
  • The AWAP-001 Access Device revolutionizes the way wireless and wired IP-based services are delivered to hospitality and residential properties.
  • The AWAP-001 integrates wired and wireless connectivity into a small unit that can be quickly and discretely installed in a standard wall box.
  • The AWAP-001 provides One Ethernet ports, a 2.4GHz 802.11b/g/n wireless access point.
  • The AWAP-001 requires a single powered cable drop to unlock its utility and, through the reduction in cabling, switch ports, and power-sourcing equipment, the AWAP-001 represents the best value for the delivery of next generation entertainment services.

Application

S/W Specification
Networking

  • IEEE802.3 10 Base TX Ethernet
  • IEEE802.3u 100 Base TX Fast Ethernet
  • IEEE802.3af Power over Ethernet
  • IEEE802.11b Wireless LAN
  • IEEE802.11g Wireless LAN
  • IEEE802.11n Wireless LAN
  • Static IP Client
  • DHCP Client
Security
  • WEP
  • WPA
  • WPA2
  • WPS (phaseII)
Management
  • Web-based Management Tool
  • Firmware Upgrade via HTTP/TFTP
  • Wizard setup for step-by-step Configuration
  • Backup/Restore/Factory Default Setting
  • Remote Authorized Management
  • SNMP v1/v2 (MIB II, Private MIB)

Hardware Specifications


Ports/Connectors
  • One RJ-45 connector for 10/100BaseTX LAN Ethernet port with Auto Cross-over and support 803.af PoE
  • One RJ-45 connectors for 10/100BaseT LAN Ethernet port with Auto Cross-over
  • Two RJ-11 connectors for telephone transparent
Power Requirement
  • Input : Power of Ethernet(48V DC, 0.15A)
  • Power Consumption:
    under 7.2watts
Radio
  • StandardˇGIEEE 802.11b/g/n
  • RF frequency rangeˇG
    North America: 2.412~2.462GHz
    Japan: 2.412MHz~2.472 GHz
    Europe ETSI : 2.412-2.472 GHz
  • IEEE 802.11g/n 40MHz Band
  • USA(FCC): 2.422GHz ~ 2.452 GHz
  • Europe(ETSI): 2.422 GHz ~ 2.462 GHz
  • Japan(TELEC) : 2.422 GHz ~ 2.462 GHz
    •    
  • Data modulation typeˇGDBPSK/DQPSK/CCK/OFDM
    •    
  • Output PowerˇG
    *-7dBm
    802.11b (11Mbps): -3.0+/-1.5 dBm
    802.11g (54Mbps): -7.0+/-1 dBm
    802.11n (300Mbps): HT20MHz: -7.0+/-1 dBm / HT40MHz: -9.0+/-1 dBm
    *14dBmˇG
    802.11b (11Mbps): 16.0+/-1.5 dBm
    802.11g (54Mbps): 14.0+/-1 dBm
    802.11n (300Mbps): HT20MHz: 14 +/-1 dBm / HT40MHz: 12+/-1dBm

    • Led Indicators

    LED State Description  
    PWR Off The Wireless Subscriber Gateway is not receiving electrical power.
      Green The Wireless Subscriber Gateway is receiving electrical power.
    SYS Off The Wireless Subscriber Gateway status is defective.
      Green The Wireless Subscriber Gateway status is complete.
      Green (Blinking) During firmware upgrades, this system LED will blink.
    LINK /  Off Port has not established any network connection.
    WAN Yellow A port has established a valid 10/100Mbps network connection.
      Yellow (Blinking) 10/100Mbpstraffic is traversing the port.
    LAN Off Port has not established any network connection.
      Green A port has established a valid 10/100Mbps network connection.
      Green (Blinking) 10/100Mbps traffic is traversing the port.
    WLAN Off The Wireless is not ready.  
      Green The Wireless Subscriber Gateway has established a valid wireless 
        connection.  
      Green (Blinking) The Wireless connection is active.  
    Dimension
    • Size: 39.3(W) x 71.6(L)x 55(H)/ mm
    • Weight: About 84 kg (Net) G.W:290g
    Environment Conditions
    • Operating Temperature: 0 to 50˘J
    • Storage Temperature: -10 to 60˘J
    • Humidity: 20% to 90% non-condensingˇF20% to 80% condensing
    Compliance
    • CE
    • NCC
    • FCC
    • RoHS
    • WEEE

    Specifications