5.8GHz Wireless System
Model :
APM-5010
AP Specification
Standards Compliance | IEEE 802.11a |
IEEE 802.3 | |
IEEE 802.3u | |
IEEE 802.3af | |
SDRAM | 32 M Byte |
Flash | 8 M Byte |
Radio Frequency Type | DSSS / OFDM |
Modulation | IEEE 802.11a: OFDM with BPSK, QPSK, 16QAM, 64QAM |
Frequency Band | IEEE 802.11a: |
5.15 ~ 5.25 GHz (lower band) | |
5.25 ~ 5.35 GHz (middle band) | |
5.725 ~ 5.825 GHz (hi-band) | |
Transmission Power | IEEE 802.11a: 20 dBm |
Transmission Rate | IEEE 802.11a: 6/9/12/18/24/36/48/54 and 108Mbps |
Access Point Interfaces | Auto MDI/MDI-X Ethernet 10/100Base-TX: RJ-45 |
Sensitivity | IEEE 802.11a: -70dBm @ 54Mbps, PER<10% |
Antenna Type | Integrated 12 dBi flat panel antenna |
Security Systems | 64-bit/128-bit/152-bit/ WEP encryption and Wi-Fi Protected |
Access(WPA)and WPA2 | |
Wireless Setting | Operation Mode -AP / Repeater / Wireless Client |
Infrastructure and Ad-hoc / Wireless Bridge(WDS) | |
Wireless Mode -802.11a / 802.11 Super A static | |
Software/Firmware | Site Survey |
DHCP Client | |
Suppressed SSID | |
Station separation | |
Support DFS and TPC | |
Support VLAN and Priority | |
Support Multiple SSID, isolation and Multi-BSSID | |
Wireless access control by MAC address (deny or accept) | |
WPA and WPA2 Support (WPA personal and enterprise) | |
Web-based configuration via popular browser | |
(MS IE, Netscape) | |
Windows " Locator" program to help find IP in DHCP | |
client mode | |
Firmware upgrade and configuration backup via Web | |
Support WME(QoS), SNTP and Syslog | |
Support Rouge AP Detection and Firmware auto Update | |
Reset to default by WebUI | |
Support SNMP V2.0 | |
Operating Environment | Operating Temperature: -30 ~ +70°C |
Power | DC 48 Volt ± 5%; 0.4A (Max.); AC adapter AC 100V ~ 240V |
Regulatory Approval | |
Network Management System OS Support |
Windows 2000/ XP/ Vista Home BASIC |
Warranty | One year limited |
Standard Accessories
