2.5GHz Wireless Bridge Solution(Outdoor)
Model :
ABR-2502
| AP Specification | |
| Standards Compliance | IEEE 802.11b |
| Frequency band | 2512 to 2584 MHz |
| Transmission power | 200mW, 1W |
| Receiver sensitivity* | 11 Mbps: 8% PER, -82 dBm (typical) |
| * Minimum receiver input power level at which a packet error ratio (PER) of less than the indicatedpercentage can be maintained, given a packet length of 1024 bytes and conditions of 20° to 30° C. | |
| Antenna type | External high gain antenna |
| Input Power |
Outdoor 200mW Input voltage DC 12V 2A; external power supplyincluded (input voltage 100V to 240V AC) Outdoor 1W Input voltage DC 15V 3A; external power supply included (input voltage 100V to 240V AC) |
| Data rates | 1, 2, 5.5, and 11 Mbps with auto fallback |
| RF spreading scheme | Direct-sequence spread-spectrum (DSSS) |
| Encoding and modulation | BPSK, QPSK, and CCK |
| Security | 64-bit / 128-bit Wired Equivalent Privacy (WEP) encryption; MACAccess Control; Administrative Access Control |
| Software Support |
Kick Start Web-based Tool Bridge Auto Learning |
| Network Management System | Windows 95/98/ME/NT4.0/2000/XP |
| Environmental requirements | Operating temperature: -30° to +70° C |
