Network Lightning / Surge Protector PoE Compatible
Model :
ASP-POE10KA
| Operating Voltage | Data 5V PoE 48V |
| Break Down Voltage (1) | Data 90V Power 82V |
| Max. Surge Discharge Current | Data 10KA Power 2.5KA (8/20uS) |
| Peak Pulse Current | 100A (10/1000uS) |
| Pin Protected (2) | All 8 pin protected |
| Protection Mode | Differential & Common mode |
| Insulation Impedance | > 1000Mohm |
| Max. Shut Capacitance (3) | Power < 2100pF Data < 2.5pF |
| Data Rate | 100Mbps |
| Impulse Protected Voltage (4) | < 500V |
| Response Time | < 5nS |
| Operating Temperature | -40°C ~ +85°C |
| Storage Temperature | -40°C ~ +125°C |
| Operating Humidify | 0 ~ 95% non condensing |
| Ground Lug Wire | 16AWG |
| Dimensions | 106 x 25.4 x 25.4 mm (include bracket) |
| 97 x 25.4 x 25.4 mm (main body) | |
| Weight | 96g |
Note 1: Data port 90V, Power port 82V. Data over-current protection in one device.
Note 2: Pin to Pin & Pin to Ground
4/5 pin to 7/8 pin & 4/5 pin to ground & 7/8 pin to ground.
1/2 pin to ground & 3/6 pin to ground.
1 pin to 2 pin over current protection, 3 pin to 6 pin over current protection.
Over current protection turn-off point 180mA ~ 360mA.
Note 3: Data < 2.5pF.
Note 4: Data < 500Vdc (1/2 to ground, 3/6 to ground)
PoE < 135Vdc (4/5 to 7/8, 4/5 to ground, 7/8 to ground)
RJ45 Connected and Pin Out
Pin 4,5 / 7,8 is POE Supply 48V Output .
Pin 1,2 / 3,6 is POE Data Output.
Features
- Shielded RJ45 jack and metal housing for EMI noise suppression.
- CAT5 / CAT5e compatible.
- Cast aluminum construction.
- Integral mounting feet.
- Bi-Directional Protection.
