GPS/GPRS Vehicle Security System

Model : VT-08

 

SIZE (L/W/H): 105 x 60 x 25 mm 

POWER SUPPLY: DC 9V ~ DC 24V 

POWER CONSUMPTION (Spare Battery):  

- 4mA ~ 10mA Standby current  

- 100mA ~ 120mA operating (SMS)  

- 250mA ~ 350mA operating (Talk time)  

- 100mA ~ 150mA operating (GPRS online) 

SPARE BATTERY: 3.7V 700 mAh

o Battery standby time: 5 hours (apprx.)

o Battery charging time: 2 hours (apprx.) 

OPERATING TEMPERATURE:  -20°C ~ +70°C 

GSM/ GPS MODULE: QUAD BAND GSM

o Operating Frequency:

GSM-850 (TX : 824Mhz ~849Mhz); 

(RX : 869Mhz ~894Mhz)

E-GSM-900 (TX : 880~915Mhz);

(RX: 925Mhz ~ 960Mhz)

DCS-1800 (TX : 1710Mhz ~ 1785Mhz);

(RX: 1805Mhz ~ 1880Mhz)

PCS-1900: ( TX : 1850.2Mhz ~ 1909.8Mhz );      

( RX : 1930.2Mhz ~ 1989.8Mhz )

o TX Output Power:

GSM-850: 

Max: 33dBm ± 5dB ; Min:  5dBm ± 5dB

E-GSM-900:

Max : 33dBm ± 5dB ; Min :  5dBm ± 5dB

DCS-1800

Max : 30dBm ± 5dB ; Min :  0dBm ± 5dB

PCS-1900: 

Max : 30dBm ± 5dB ; Min :  0dBm ± 5dB

o Sensitivity:

GSM-850: < -106 dBm

E-GSM-900: < -106 dBm

DCS-1800: < 104 dBm

PCS-1900 : < 104 dBm

o GPS Sensitivity: > -160 dBm

o Protocol: NMEA-0183 V3.0

o Projection: WGS-84

GSM Application Programming Interface AT Commands UI APIs

GPS ANTENNA:

o Frequency band: 1575.42 ± 2 Mhz o Gain: +24 dBi Active Antenna

o Output Impedance: 50 Ω 

INPUTS:

o ACC Ignition

o SOS Analog Input

o AD Analog Input

o Camera Input 

OUTPUTS: 

o RS232 Output (TTL Level)

o Engine Immobilizer Output

 

 

The SuperGuard SG-VT08 is a GPS vehicle tracking device, ideal for fleet management and commercial data centers. 

1. The SG-VT-08 is easy and quick to install, saving costly installation time and fees. 

2. Data exchange between device and server is maintained over GPRS and Internet connection. All commands and configuration details can be sent either through GPRS or SMS. An SMS only mode is also available.  

3. Up to 5 authorized contact numbers can be configured to inquire vehicle location through 2-RING phone call or short message command. Alternately, you will be able to query device location and status over Internet Website or GPRS enabled cell phones at all times. 

4. You can setup and configure monitoring activities and alerts, using Control Base software or Tracking Web services via Internet Explorer or mobile on GPRS enabled cell phones. 

5. Tracking schedules, live tracking and parameters including trip information such as total travelled distance or trip distance in km can be configured according to your needs. 

6. You can define and load up to 4 restricted areas (Geo-Fence areas) to the device and setup maximum speed alert. 

7. The engine immobilizer allows you to disable the vehicle ignition according to specified trigger times through GPRS or SMS command. 

8. The device comes with one SOS Push Button designed for emergency alarms to be sent to server and contact numbers. It should be placed at a hidden place within reach of the driver on the dashboard. 

9. You can configure and activate three power saving modes according to ignition off time, no movement or no communication time.