2.4GHz + 5GHz MIMO Outdoor AP/CPE
The AAP-502405MM is the dual-bandconcurrent outdoor turnkey solution.
It operating on 2.4GHz and 5GHz supporting 802.11a/b/g/n MIMO 2x2 standard allowing to cover large area network and provide intelligent broadband services for users. With WDS point to point and WDS point to multi-point wireless bridge to save infrastructure investments.
The AAP-502405MM support Gigabit 802.3af PoE allow powered by PoE switch remotely.
Specification
Hardware Spec. |
||
CPU |
Atheros AR9344 ( 560MHz) |
|
Standards |
IEEE 802.11a/b/g/n 2.4GHz and 5GHz IEEE 802.3, IEEE 802.3u, IEEE 802.3ab IEEE 802.3af PoE IEEE 802.11h WiF Multimedia (WMM) Wireless Distribution System (WDS) |
|
Interface |
1x 10/100/1000Base-T Gigabit PoE port 2x System LED 1x Reset Button 2x 2.4GHz N type Connector 2x 5GHz N type Connector |
|
Flash / SDRAM |
16M/64M |
|
Temperature |
-40℃ ~ 70℃ |
|
Humidity |
5%~95% (Non-condensing) |
|
Power |
802.3af Standard PoE |
|
Power Consumption |
10.56W |
|
Dimension |
269 x 239 x 68 mm |
|
Weight |
TBD |
|
Enclosure |
IP67 waterproof certificated |
|
Radio Spec. |
||
Frequency |
2400 ~ 2485MHz 5150 ~ 5825MHz |
|
Data Rates |
802.11b: up to 11Mbps 802.11a/g: up to 54Mbps 802.11n: up to 300Mbps |
|
TX Power |
2.4GHz: 27dBm +/- 2dBm 5GHz: 27dBm +/- 2dBm |
|
RX Sensitivity |
||
Legacy Mode |
2.4GHz |
5GHz |
1Mbps |
-96 |
|
6MBps |
-96 |
-95 |
11Mbps |
-93 |
|
54Mbps |
-81 |
-81 |
MCS 0 |
HT20: -96 HT40: -92 |
HT20: -95 HT40: -92 |
MCS 7 |
HT20: -78 HT40: -75 |
HT20: -78 HT40: -74 |
MCS 15 |
HT20: -75 HT40: -71 |
HT20: -74 HT40: -70 |
Software Feature
Wireless
•Operation modes: AP mode, WDS Point to Point, WDS Point to Multi-Point
•VAP support up to 16 SSIDs
•Transmit power adjustable
•IEEE 802.11h DFS/DFS2 and automatic TPC
•Traffic Control for each SSID
•Dynamic Channel Selection for noisy environment
•Rate Selection to disable low data rate access
•Client connection preemption ( n> ag >b) in case service capability is full
•Auto-Channel Selection
Security
•WEP 64/128-bits
•WPA / WPA2
•WPA / WPA2 (PSK) over WDS
•Secure SSH, Telnet, SSL, HTTPS
•Access control list
•RADIUS authentication
•EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, EAP-SIM, EAP-AKA
•SSID broadcast disable
Network Management
•IPv4 and IPv6 dual stack support
•Industrial CLI, Telnet, SSH, HTTP and HTTPs
•SNMP V1, V2, V3
•Software upgrade by TFTP, FTP or HTTP
•Configuration file backup and restore by TFTP or FTP
•System Information – AP status, Station status, event logs
•Dual Image
•SNTP
•Scheduling Rebooting
•Radius Accounting
|